External Transmitter not working.
Posted: Thu 5. Jan 2012, 08:45
Dear IR Trans,
We have an Ethernet IR Trans and we have removed the red jumper behind the receiver as described in the manual. We also selected only the External receiver on "Device Status".
We have connected the stereo mini jack on the the slot next to the on board receiver and the status LED blinks green once when connected.
We try to send IR signals but we still see the internal LEDs blinking (we use our phone's camera). The External does not still work.
Is there something we have not done correctly?
Best regards,
N. Armonis
Hellas Digital
We have an Ethernet IR Trans and we have removed the red jumper behind the receiver as described in the manual. We also selected only the External receiver on "Device Status".
We have connected the stereo mini jack on the the slot next to the on board receiver and the status LED blinks green once when connected.
We try to send IR signals but we still see the internal LEDs blinking (we use our phone's camera). The External does not still work.
Is there something we have not done correctly?
Best regards,
N. Armonis
Hellas Digital