Hi,
Having recently moved house, I have started re-configuring my IRTrans setup. I have a USB IRTrans module (firmware U3.02.09) connected to a Linux box running irserver. This learns and transmits codes without any problem.
However, I recently found one of my old bus-modules, firmware B4.04.39. I have connected this to the USB module, using a 3-core cable (distance is about 10 metres, in a different room). The bus-module is detected by irserver, and shows up when I do a "Device Mode" status check from a (Windows) box running the IRTrans client. It appears to learn codes, and claims to send them, but nothing happens apart from the red LED flashing on the bus module at the appropriate point. I am also unable to "bridge" the modules; IR codes transmitted in one room are not echoed to the other.
Is there something obvious I'm doing wrong, and are the (very different) firmware versions compatible?
Thanks,
Gavin Sallery