Page 1 of 1
CommandFusion
Posted:
Fri 19. Sep 2008, 11:52
by clmuller
Hi, is it possible to use irtrans with CommandFusion software?
Thanks
Re: CommandFusion
Posted:
Fri 19. Sep 2008, 12:27
by IRTrans
No idea - I do not know CommandFusion at all.
IRTrans
Re: CommandFusion
Posted:
Fri 19. Sep 2008, 13:21
by clmuller
Re: CommandFusion
Posted:
Fri 19. Sep 2008, 17:03
by IRTrans
Hi,
they have contacted us in the meantime.
They will integrate IRTrans support into their next SW release.
IRTrans
Re: CommandFusion
Posted:
Sat 20. Sep 2008, 17:35
by clmuller
Cool, thanks
Re: CommandFusion
Posted:
Tue 5. Jul 2011, 02:25
by trikom
I interesting to use commandfusion integrated with IrTrans. Please help me.
I have IrTrans wifi with dB. I send the following command:
Initialization: ASCI
Command: Asnd Sony, vol+
I write de dB, but don't work
Thank!
Trikom
Re: CommandFusion
Posted:
Tue 5. Jul 2011, 11:12
by IRTrans
Hi,
we would suggest to use UDP.
To do that just send "snd Sony, vol+" to UDP port 21000 of the IRTrans device.
Please make sure that the IR Codes have been uploaded. To check that you can send the IR Code via http (Browser -> IRTrans Ethernet manual).
IRTrans
Re: CommandFusion
Posted:
Thu 14. Jul 2011, 03:43
by trikom
Hi, in the UDP comunication is not necesary to send initialization "ASCI"
And the command to send is without "A"
Ex:
Command UDP:
send sony, vol+
Command TCP:
Asend sony, vol+
OK?
Thank!
Trikom
Re: CommandFusion
Posted:
Thu 14. Jul 2011, 08:59
by IRTrans
Hi,
yes, that is correct.
Using UDP you shall not send "ASCI" to start.
Furthermore no "A" in front of the command.
Please note that the command is "snd" or "Asnd" and not "send" or "Asend".
IRTrans