Hello,
Sorry for my bad english but i'm french ...
I use Homeseer 2.2 and plugin Irtrans. They're working on computer 192.168.7.200
My IRtrans device is an ethernet v2.2 IRDB . IIP adress : 192.68.7.106
I can access to web interface
At the initializing homeseer log is :
04/01/2009 10:55:29 - IRTrans Debug - irtCreateInstance: irt instance created and connected to server.
04/01/2009 11:11:24 - IRTrans Debug - IRTrans Warning : Debug Mode activated. Waiting 10 secs...
04/01/2009 11:11:34 - IRTrans Debug - StartConnectionMonitor: Starting thread ConnectionMonitorThread
04/01/2009 11:11:34 - IRTrans Debug - SupportsIRMatch() called, returning true
04/01/2009 11:11:34 - IRTrans Debug - MaxDevices() called
04/01/2009 11:11:34 - IRTrans Debug - MaxKeys() called
04/01/2009 11:11:34 - IRTrans Debug - MaxZones() called
04/01/2009 11:11:39 - IRTrans Debug - irtCreateInstance: irt instance created and connected to server.
04/01/2009 11:11:39 - IRTrans Debug - IRTrans : Connection to 192.168.7.106 was successful.
I run irserver with this command line:
C:\Program Files\IRTrans>irserver -http_port 82 -learned_only -ip_relay -debug_code 192.168.7.106 and i can access to server with http://192.168.7.200:82
......................... The problem :
recurent log : (every 30 seconds)
04/01/2009 11:12:09 - IRTrans Debug - GetDeviceData failed for location 0: This operation is only supported using the irserver
04/01/2009 11:12:39 - IRTrans Debug - GetDeviceData failed for location 0: This operation is only supported using the irserver
04/01/2009 11:13:09 - IRTrans Debug - GetDeviceData failed for location 0: This operation is only supported using the irserver
Homeseer can't learn code
when i'm trying to learn an infrared code in homeseer, after timeout homeseer return 'learn operation for location 0 was cancelled'
Logs:
04/01/2009 11:21:59 - IRTrans Debug - KeyLearnable() called with location 0
04/01/2009 11:21:59 - IRTrans Debug - SupportsIR2() called, returning true
04/01/2009 11:21:59 - IRTrans Debug - GetDeviceData failed for location 1: This operation is only supported using the irserver
04/01/2009 11:21:59 - IRTrans Debug - KeyLearnable() called with location 1
04/01/2009 11:21:59 - IRTrans Debug - SupportsIR2() called, returning true
04/01/2009 11:21:59 - IRTrans Debug - GetDeviceData failed for location 2: This operation is only supported using the irserver
04/01/2009 11:21:59 - IRTrans Debug - KeyLearnable() called with location 2
04/01/2009 11:21:59 - IRTrans Debug - SupportsIR2() called, returning true
04/01/2009 11:22:03 - IRTrans Debug - LearnIR2() called with location 0
04/01/2009 11:22:03 - IRTrans Debug - Learn failed for location 0: This operation is only supported using the irserver
When i'm trying to learn code with the Irtrans Gui client , this one work correctly .
Can you help me about learning infrared code in homeseer