by fkai8025 » Fri 8. May 2009, 13:37
IRTrans LAN Controller XL (the black box on your home page). LAN we use TCP/IP.
We found that if the learning command setting is "RAW DATA", the IRTrans can work well with my STB.
But we will use the leaning command setting "timming", then the command must be sent twice, the IRTrans xl can drive the STB.
(use "timming mode")When you send the fisrt, the remote light on the STB has no response, but the second the light has response and the STB works.
(use "RAW DATA")the STB can response to the IRTrans XL correctly.
The .rem file (works well with USB IRtrans and other IRTrans XL) is this:
[REMOTE]
[NAME]SkyRemote
[TIMING]
[0][N]0[RC]1[NOTOG1][RP]81[FREQ]36[SB][RS][RC6]
[1][N]0[RC]1[RP]0[FREQ]36[SB][RC6]
[COMMANDS]
[HELP][T]0[D]S11100000000000000010000001
[HOME][T]1[D]S11100000000000110010000000
[LEFT_ARROW][T]0[D]S11100000000000000001011010
[RIGHT_ARROW][T]0[D]S11100000000000000001011011
[DOWN_ARROW][T]0[D]S11100000000000000001011001
[UP_ARROW][T]0[D]S11100000000000000001011000
[ON_OFF][T]0[D]S11100000000000000000001100
[0][T]0[D]S11100000000000000000000000
[1][T]0[D]S11100000000000000000000001
[2][T]0[D]S11100000000000000000000010
[3][T]0[D]S11100000000000000000000011
[4][T]0[D]S11100000000000000000000100
[5][T]0[D]S11100000000000000000000101
[6][T]0[D]S11100000000000000000000110
[7][T]0[D]S11100000000000000000000111
[8][T]0[D]S11100000000000000000001000
[9][T]0[D]S11100000000000000000001001
[CANCEL][T]0[D]S11100000000000000010000011
[ENTER][T]0[D]S11100000000000110001011100
[STOP][T]0[D]S11100000000000110000111111
[PLAY][T]0[D]S11100000000000110000111110
[PAUSE][T]0[D]S11100000000000110000100100
[RECORD][T]0[D]S11100000000000110001000000
[RED][T]0[D]S11100000000000000001101101
[GREEN][T]0[D]S11100000000000000001101110
[BLUE][T]0[D]S11100000000000000001110000
[YELLOW][T]0[D]S11100000000000000001101111
[FAST_FORWARD][T]1[D]S11100000000000110000101000
[FAST_REVERSE][T]1[D]S11100000000000110000111101
[CHANNEL_DOWN][T]0[D]S11100000000000000000100001
[CHANNEL_UP][T]0[D]S11100000000000000000100000
[GUIDE][T]0[D]S11100000000000000011001100
[BOX_OFFICE][T]0[D]S11100000000000000001111101
[SERVICES][T]0[D]S11100000000000000001111110
[INTERACTIVE][T]0[D]S11100000000000000011110101
[ON_OFF][T]0[D]S11100000000000000000001100
[1][T]1[D]S11100000000000110000000001
[2][T]1[D]S11100000000000110000000010
[3][T]1[D]S11100000000000110000000011
[4][T]1[D]S11100000000000110000000100
[5][T]1[D]S11100000000000110000000101
[6][T]1[D]S11100000000000110000000110
[7][T]1[D]S11100000000000110000000111
[8][T]1[D]S11100000000000110000001000
[9][T]1[D]S11100000000000110000001001
[0][T]1[D]S11100000000000110000000000
[HELP][T]1[D]S11100000000000110010000001
[LEFT_ARROW][T]1[D]S11100000000000110001011010
[RIGHT_ARROW][T]1[D]S11100000000000110001011011
[DOWN_ARROW][T]1[D]S11100000000000110001011001
[UP_ARROW][T]1[D]S11100000000000110001011000
[CANCEL][T]1[D]S11100000000000110010000011
[RED][T]1[D]S11100000000000110001101101
[GREEN][T]1[D]S11100000000000110001101110
[BLUE][T]1[D]S11100000000000110001110000
[YELLOW][T]1[D]S11100000000000110001101111
[CHANNEL_DOWN][T]1[D]S11100000000000110000100001
[CHANNEL_UP][T]1[D]S11100000000000110000100000
[GUIDE][T]1[D]S11100000000000110011001100
[BOX_OFFICE][T]1[D]S11100000000000110001111101
[SERVICES][T]1[D]S11100000000000110001111110
[INTERACTIVE][T]1[D]S11100000000000110011110101
[ON_OFF][T]1[D]S11100000000000110000001100
[SKY][T]1[D]S11100000000000110010000000
[INFO][T]1[D]S11100000000000110011001011
[MUTE][T]1[D]S001010010000
[TEXT][T]0[D]S11100000000000110000111100
I don't know how to see the firewire version.
Another question: I want to use the USB IRTrans to receive the command as a server, when linux start up the irserver need run automatically. I put the command /usr/local/irtrans/irserver -daemon /dev/ttyUSB0 in the /etc/rc.local, but when I start up the linux, I find that irserver.log "can not IP gateway"(maybe, I cann't rember it clearly). Then I use root to run the command manually, then the server start up. Can you give me some advice to achieve the goal?