I have a Pace TDS850NV HD sat box.
I have tried to learn all codes in RAW mode, with timing etc.
If I tried to send button 1, the reciver respond, but if I want to send 11 its only respond on first one.
Example from IR-Trans.
1+1 = Channel 1 (Wrong, missing last digit)
1+2 = Channel 12 (Correct)
1+3 = Channel 13 (Correct)
...
2+2 Channel 2 (Wrong, missing last digit)
....
3+3 Channel 3 (Wrong, missing last digit)
...
1+1+1 Channel 1 (Wrong, missing last 2 digit, Should be channel 111)
The receiver does not respond on double key's from irtrans.
But if send key 1 from irtrans and the emidietly press 1 from remote and then again 1 from irtrans its respond. Total code to receiver (111)
[1][N]5[1]392 304[2]160 280[3]160 616[4]160 784[5]160 448[RC]1[RP]0[FREQ]38
[1][T]1[D]0121233111#0024;24311141
[1][RAW]35[FREQ]38[D]400 296 160 280 192 584 192 256 192 584 192 752 192 752 192 256 184 264 184 256 168 608 192 424 184 760 184 256 192 256 160 288 184 424 208
Any qlue?