troubleshoot a usb itrans module

Support forum for the iRed Mac software

Moderators: marcus, tinbert

troubleshoot a usb itrans module

Postby petemalk » Fri 3. Feb 2012, 14:59

hi, i've had a usb module for a while and recently i've noticed that it's not been working reliably. i plug it in and i get
the status led is green, then red, then nothing. i've switched usb cables, i've even plugged it into another
one of my macs (both macs are running 10.7.2) but it doesn't seem to work.

is there anything else i can do to troubleshoot this?
petemalk
 
Posts: 2
Joined: Fri 3. Feb 2012, 14:54

Re: troubleshoot a usb itrans module

Postby IRTrans » Fri 3. Feb 2012, 16:56

The Status LED Green/Red and then off is the standard behaviour of the device.

IRTrans
IRTrans
Administrator
 
Posts: 2115
Joined: Mon 21. Apr 2008, 23:32

Re: troubleshoot a usb itrans module

Postby petemalk » Fri 3. Feb 2012, 18:20

turns out that the ired2 installation was corrupted somehow and after re-installing and re-creating
the ir codes within ired2, everything still works.

thanks for telling me about the normal behavior of the status led, that information was hard to come by.
petemalk
 
Posts: 2
Joined: Fri 3. Feb 2012, 14:54


Return to iRed / Mac

Who is online

Users browsing this forum: No registered users and 3 guests

cron